Asus M2A-MVP - Manual (Page 96)

2-48 Chapter 2: BIOS setup
Rebuilding a RAID array
This option allows you to rebuild an existing RAID array.
To rebuild a RAID array:
1. From the ULI RAID BIOS Setup utility menu, move the cursor to Rebuild
RAID Array then press .
2. Use the up or down arrow keys to select the source drive from which to
rebuild then press . The striped mark “R” appears before a selected
drive.
3. The utility prompts if you want to proceed with rebuilding the array.
Press to continue or press to return to the menu.
Creating a RAID 5 configuration
To create a RAID 5 set:
1. From the ULI RAID BIOS Setup utility menu, move the cursor to Create
RAID 5 for Reliability then press .
2. Use the up or down arrow keys to select a drive then press or
. The striped mark “5” appears before a selected drive.
3. Repeat step 2 to select the second and third drives.
4. The utility prompts the following warning message:
Data on RAID drives will be deleted (Y/N)?
Press to continue or press to return to the menu.
5. Key in a RAID name with a maximum of eight (8) alphanumeric characters
then press . Do not use special characters or symbols.
6. The utility displays the RAID Array settings at the bottom of the screen.
Drive Model Mode Capacity RAID Array/Type
Channel 0 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/5
Channel 1 Master: XXXXXXXXXXX XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/5
Channel 3 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/5
Capacity RAID Type Stripe Size RAID Name
RAID Array A : 160 GB 5 16K RAID5
RAID Array B :
RAID Array C :