Asus M2A-MVP - Manual (Page 44)

1-32 Chapter 1: Product introduction
7. USB connectors (10-1 pin USB56, USB 78, USB910)
These connectors are for USB 2.0 ports. Connect the USB module cable
to any of these connectors, then install the module to a slot opening at the
back of the system chassis. These USB connectors comply with USB 2.0
specification that supports up to 48� Mbps connection speed.
Never connect a 1394 cable to the USB connectors. Doing so will damage the
motherboard!
M2A-MVP
M2A-MVP USB 2.0 connectors
USB56
NC
GND
USB_P6+ USB_P6- USB+5V
GND USB_P5+ USB_P5- USB+5V 1
USB78
NC
GND
USB_P8+ USB_P8- USB+5V
GND USB_P7+ USB_P7- USB+5V 1
USB910
NC
GND
USB_P10+ USB_P10-
USB+5V
GND USB_P9+ USB_P9- USB+5V 1
The USB 2.0 module is purchased separately.
8. IEEE 1394a port connector (10-1 pin IE1394_2)
This connector is for a IEEE 1394a port. Connect the IEEE 1394a module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
M2A-MVP
M2A-MVP IEEE 1394 connector
IE1394_2
PIN1
GND +12V
TPB2-
GND
TP
A2-
+12V TPB2+ GND TP
A2+
The IEEE 1394a module is purchased separately.
Never connect a USB cable to the IEEE 1394a connector. Doing so will damage
the motherboard!