Asus M2A-MVP - Manual (Page 64)

2-16 Chapter 2: BIOS setup
PIO Mode [Auto]
Selects the PIO mode. Configuration options: [Auto] [�] [1] [2] [3] [4]
DMA Mode [Auto]
Selects the DMA mode. Configuration options: [Auto] [SWDMA�] [SWDMA1]
[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]
[UDMA3] [UDMA4] [UDMA5]
SMART Monitoring [Auto]
Sets the Smart Monitoring, Analysis, and Reporting Technology.
Configuration options: [Auto] [Disabled] [Enabled]
32Bit Data Transfer [Disabled]
Enables or disables 32-bit data transfer.
Configuration options: [Disabled] [Enabled]
2.3.5 Storage Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Select an item then press if you wish to
configure the item.
Onchip SATA Channel [Enabled]
Allows you to enable or disable the onchip SATA channel.
Configuration options: [Disabled] [Enabled]
The succeeding item appears only if the OnChip SATA Channel item is set to
[Enabled].
Onchip SATA Type [Native IDE]
Allows you to select the onchip SATA type.
Configuration options: [Native IDE] [RAID] [A�CI] [Legacy IDE]
Storage Configuration
Onchip SATA Channel [Enabled]
Onchip SATA Type [Native IDE]
Options
Disabled
Compatible