Asus M2A-MVP - Manual (Page 81)

ASUS M2A-MVP 2-33
2.6 Boot menu
The Boot menu items allow you to change the system boot options. Select an item
then press to display the sub-menu.
2.6.1 Boot Device Priority
BIOS SETUP UTILITY
Boot
Specifies the boot
sequence from the
availabe devices.
A device enclosed
in parenthesis has
been disabled in the
corresponding menu.
Boot Device Priority
1st Boot Device [1st FLOPPY DRIVE]
2nd Boot Device [Hard Drive]
3rd Boot Device [ATAPI CD-ROM]
BIOS SETUP UTILITY
Main Advanced Power Boot Tools Exit
Boot Settings
Boot Device Priority
Boot Settings Configuration
Security
S p e c i f i e s t h e B o o t
Device Boot Priority
sequence.
A virtual floppy disk
drive (Floppy Drive
B:) may appear when
y o u s e t t h e C D - R O M
drive as the first boot
device.
1st ~ xxth Boot Device [xxx Drive]
These items specify the boot device priority sequence from the available devices.
The number of device items that appears on the screen depends on the number of
devices installed in the system. Configuration options: [xxx Drive] [Disabled]
2.6.2 Boot Settings Configuration
BIOS SETUP UTILITY
Boot
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Boot Settings Configuration
Quick Boot [Enabled]
Full Screen Logo [Enabled]
AddOn ROM Display Mode [Force BIOS]
Bootup Num-Lock [On]
PS/2 Mouse Support [Auto]
Wait For ‘F1’ If Error [Enabled]
Hit ‘DEL’ Message Display [Enabled]
Interrupt 19 Capture [Disabled]
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]