Asus M2A-MVP - Manual (Page 94)

2-46 Chapter 2: BIOS setup
Setting the Stripe Size
To set the stripe size:
1. From the ULI RAID BIOS Setup utility menu, move the cursor to Stripe Size
then press .
2. Use the up or down arrow keys to select a stripe size then press .
3. The stripe size is displayed beside the Stripe Size menu item.
TIP: For server systems, we recommend using a lower array block size. For
multimedia computer systems used mainly for audio and video editing, we
recommend a higher array block size for optimum performance.
Drive Model Mode Capacity RAID Array/Type
Channel 0 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 1 Master: XXXXXXXXXXX XXXXX MB
Channel 2 Master: XXXXXXXXXXX SATA 2 XXXXX MB RAID A/JBOD
Channel 3 Master: XXXXXXXXXXX SATA 2 XXXXX MB
Capacity RAID Type Stripe Size RAID Name
RAID Array A : XXXXX MB JBOD RAIDJ
RAID Array B :
RAID Array C :
5. Key in a RAID name with a maximum of eight (8) alphanumeric characters
then press . Do not use special characters or symbols.
6. The utility displays the RAID Array settings at the bottom of the screen.