E n additional informat i o n – Philips 150B User Manual
Page 19
19
E
N
Additional Informat i o n
The monitor will detect various display situation automatically. When the monitor detects the problems, the screen will automatically show the
d i ff e rent warning signals to remind you. This warning signals can be disabled by pressing AUTO button for more than 10 seconds if there is no
video signal in.
• NO VIDEO INPUT •
This screen appears when there is no video signal input. Please check
that the signal cable is properly connected to the graphics board or
P C .
• CANNOT DISPLAY THIS VIDEO MODE •
This screen appears when the input frequency from the computer is
not standard video mode or out of the monitor’s scanning range.
Please change the display mode of the operating software in the
computer (i.e. Windows) to1024 x 768 @ 60 Hz for best display
re s u l t s .
• ENTERING SLEEP MODE •
This screen warns when the monitor is about to enter the sleep mode.
Please press any key on the keyboard or click the mouse for waking
the monitor and computer.