Water-stop device, 5 water drainage – AEG L87695WD User Manual

Page 35

Text mode
Original mode

• Connect the water inlet hose to the

cold water tap with 3/4 thread.

CAUTION!
Make sure that there are no leaks
from the couplings.

Do not use an extension hose if
the inlet hose is too short. Con-
tact the service centre for the re-
placement of the inlet hose.

Water-stop device

The inlet hose has a water stop device.
This device prevents water leaks in the
hose because of its natural ageing. The
red sector in the window «A» shows this
fault .
If this occur, close the water tap and
contact the service centre to replace the
hose.

15.5 Water drainage

There are different procedures to con-
nect the drain hose:

With the plastic hose guide.

ENGLISH