AEG L87695WD - Manual (Page 34)

WARNING!
Remove all the packaging and
the transit bolts before you install
the appliance. We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
15.3 Positioning and levelling
x4
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appliance.
• Make sure that the appliance does not
touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibration,
noise and the movement of the appli-
ance when in operation.
• The appliance must be level and sta-
ble.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the level.
15.4 The inlet hose
20 O 20 O 20 O
45 O 45 O 45 O
• Connect the hose to the appliance.
Turn the inlet hose only left or right.
Loose the ring nut to set it in the cor-
rect position.
34 www.aeg.com