beautypg.com

4 start/pause button, 5 delay start button, 6 time save button – AEG L87695WD User Manual

Page 10: 7 drying time button, 8 automatic dry button 8, 9 permanent extra rinse function

background image

D

• The programme time (washing and/or drying phase)

When the programme starts, the time decreases with steps of 1 mi-
nute.

• The delay start

When you press the delay start button, the display shows the delay
start time.

• Alarm codes

If the appliance has a malfunction, the display shows alarm codes. Re-
fer to 'Troubleshooting' chapter.

• Err

The display shows this message for some seconds if:
– You set a function that is not applicable for the programme.
– You change the programme while it operates.

The indicator of the Start/Pause button

4

flashes.

When the programme is completed.

1) Only available for Spin/Drain programme
2) They come on when you set an automatic drying programme.
3) The symbols appear on the display when the related phase or function is set.

5.4 Start/Pause button

4

Press button

4

to start or interrupt a

programme.

5.5 Delay start button

5

Press button

5

to delay the start of a

programme from 30 minutes to 20 hours.

5.6 Time save button

6

Press the button

6

to decrease the

programme duration.
• Press one time to set 'Shortened dura-

tion' for items with daily soil.

• Press two times to set 'Extra Quick' for

items with almost no soil.

Some programmes accept only
one of the two functions.

5.7 Drying time button

7

Press this button to set the time that
suits the fabrics you have to dry. The dis-
play shows the set value.
Each time you press this button the time
value increases by 5 minutes.

You cannot set all time values for
different types of fabrics.

5.8 Automatic dry button 8

Press this button to set an automatic lev-
el of dryness for the laundry. The display
shows the symbol of the set level.
• Extra dry
• Cupboard dry
• Iron dry

You can not set all automatic lev-
els for each type of fabrics.

5.9 Permanent extra rinse
function

With this function you can keep the extra
rinse function permanently on when you
set a new programme.
• To activate the function press button

6

and button

5

at the same time

until the display shows the symbol

.

• To deactivate the function press but-

ton

6

and button

5

at the same

time until the symbol

goes off.

10 www.aeg.com