AEG Micro-Processor Charging Unit LP 3.8 - Manual (Page 21)

21 GB
Disposal
Do not dispose of packaging or the product
through your household waste! the product
and packaging are made from recyclable
materials (plastics, metals, paper).
if the product is no longer suitable for use dispose of it
in an environmentally friendly manner in accordance
with your local ordinances.
Service
should you have any questions regarding commission-
ing or operating in spite of studying these operating
instructions, or if a problem should occur against all
expectations, please get in contact with your specialist
supplier.
CLEaNiNg, CarE
aND sErViCE
Your charger can be kept functional for years with
minimum care.
▪
after the charging process is completed, clean the
clamps. to prevent corrosion, wipe off any battery
fluid that has come into contact with the clamps.
▪
roll up the cables properly when you store the
charger. this helps to prevent damage to the cables
and the charger.
▪
occasional cleaning of the charger casing with
a soft cloth keeps the surface shiny and helps to
prevent corrosion.
▪
store the charger in a clean and dry location.
Caution!
only qualified technical personnel should change the
plug or the connecting cables.
this will guarantee the safety of the device is main-
tained.
if the product is no longer suitable for use dispose of it
in an environmentally friendly manner in accordance
with your local ordinances.