AEG Micro-Processor Charging Unit LP 3.8 - Manual (Page 16)

16
Product Overview
3
1
4
7
5
6
8
2
9
1. power plug
2. Fuse
3. Battery charger
4. Control and display
panel
5. terminal cable (+)
(red) with ring terminal
6. terminal cable (-)
(black) with ring
terminal
7. terminal cable (+) with
clamp (red)
8. terminal cable (-) with
clamp (black)
9. mounting apertures
proDUCt DEsCriptioN
Intended use
the charger is intended for charging, float charging
and regenerating 12 V direct current batteries (only
rechargeable, maintenance-free, sealed batteries or
lead-acid batteries (sLa)), as they are installed in cars,
ships, trucks and other vehicles. this includes different
types of lead-acid:
▪
wet cell batteries / sealed leadacid batteries (liquid
electrolyte)
▪
gel batteries (gel-like electrolyte)
▪
agm batteries (electrolyte in fibreglass fleece)
▪
maintenance-free batteries and VrLa batteries
(lead-acid batteries with overpressure valve)
the charger can be connected directly to the bat-
tery using the clamps. the charger is not designed to
charge any batteries other than those stated above. it
is exclusively certified for private use. any other use or
modification to the device is considered as non intend-
ed and bears considerable dangers. the manufacturer
accepts no responsibility for any damages arising from
non-intended use.
Performance characteristics
▪
With micro-processor
▪
Charger for all common 12 V vehicle batteries
▪
3800 ma maximum charging capacity
▪
intelligent 5-level charge cycle
(iiUoiUp characteristic)
▪
Not necessary to uninstall the battery
▪
Fully automated charging, diagnosis, recovery and
maintenance function
▪
With comfort connection
▪
ideal for seasonal vehicles such as convertibles or
motorcycles
▪
safe and easy application