AEG Voxtel D220bt - Manual (Page 31)

31
UK
tPress
OK
to confirm.
10.7 Registration
Important:
When you purchase your phone system, all handsets are already
registered to your base, so you do not need to register them.
Handset registration is only necessary when you buy extra handsets or
if a handset has become faulty.
You can register additional handsets to have up to five handsets per
base unit, with each handset’s number (1 to 5) shown on its display.
(Note: each handset can only be registered to one base.)
To register a new handset to your base:
tPress and hold on the base station for more than five seconds, to
put the base station into registration mode. It will stay in registration
mode for about 1 minute, so the following handset sequence must
be completed within this time.
tPress
OK
and / to select “REGISTRATION”.
tPress
OK
to display “PIN?------”.
tEnter the 4-digit system PIN (default0000).
tPress
OK
to confirm, and the display will show “PLEASE WAIT”.
If the handset registration is successful, you will hear a confirmation
tone and the will stop flashing.
The handset will automatically be allocated the next available handset
number. This handset number is shown in the handset display in
standby mode. If the handset registration is unsuccessful, the
p y
will
still flash.
10.8 Reset your phone
You can reset your phone to the default settings . After a reset, all your
personal settings, call list entries and redial list entries will be deleted
but your phonebook remains unchanged.
tPress
OK
and / to select “DEFAULT“.
tPress
OK
to display “PIN?-----“.
tEnter the 4-digit system PIN (default 0000).
tPress
OK
to display “CONFIRM?“
tPress
OK
to confirm, and the phone will be reset to its default
settings.