AEG Voxtel D220bt - Manual (Page 12)

12
HOME line - Your conventional telephone land line.
Pairing - This refers to the process of two Bluetooth devices registering
device information with each other. The telephone base must be
paired with a Bluetooth enabled mobile phone before the Bluetooth
device can be used.
IMPORTANT INFORMATION
tRefer to your mobile phone user’s guide for more information about
its Bluetooth function.
tMake sure that your Bluetooth enabled mobile phone is between
one to 2 m away from the telephone base in order to maintain a clear
and consistent connection between your Bluetooth mobile phone,
telephone base and cell tower.
tMake sure that your Bluetooth enabled mobile phone has sufficient
signal strength. You may need to move the Bluetooth enabled
mobile phone and telephone base to a location where the mobile
signal may be stronger.
tCharge your Bluetooth mobile phone while it is connected to the
telephone base because your mobile phone’s battery will discharge
faster while it is connected wirelessly to the telephone base.
tMonitor your mobile phone’s usage because airtime is deducted
from your mobile plan for the duration of the MOBILE calls.
7.2 Bluetooth Setup
7.2.1 Setup Mobile
To pair and connect a Bluetooth enabled mobile phone:
tPlace your cell phone near the handset and base unit.
tPress
OK
and then / to select “MOBILE SETUP“.
tPress
OK
and display will show “READY?”.
tPress
OK
and display will show “DISCOVERING”. The Bluetooth
feature is activated.
tUsing your Bluetooth enabled mobile phone, turn on the Bluetooth
feature and search for a new device.
tOnce your Bluetooth enabled mobile phone has found the AEG-BT
telephone, select it.
tUsing your Bluetooth enabled mobile phone, enter the PIN code of
the telephone (the default PIN code is 0000) to continue the pairing
process.