AEG Voxtel D220bt User Manual
Page 14
14
tDisplay will show the mobile name of paired device(s).
Note:
Display will show “EMPTY” if there is no device paired.
tPress
OK
and then / to select the desired mobile device.
For the connected mobile device:
tPress
OK
to remove the mobile device.
tPress
OK
to confirm.
For the mobile phone that is not connected:
tPress
OK
and then / to select “CONNECT“ or “REMOVE“.
tPress
OK
to confirm. If you select “REMOVE“, press
OK
again
to confirm.
Notes:
When the connected mobile is removed, corresponding Bluetooth
device icon and LED on base will be off.
>When the disconnected mobile is connected, corresponding
device or will be on.
>When the mobile is removed, the device name will be removed
and “EMPTY“ will be displayed instead in the paired device list.
7.3
Make a Call
7.3.1 Preparatory
dialing
Using the home line
Enter the phone number and press or to dial the number with
home line.
Using the mobile line
Enter the phone number and press
MOBILE
to dial the number with
mobile line. If there are two mobile devices connected, you have to
select one device from the list.
Note:
If no mobile device connected, display will show “NO MOBILE” and
then back to idle.