AEG Voxtel D220bt User Manual

Page 26

display, and the alarm tone rings for 45 seconds. You can press any key
to disable the alarm.
If the snooze function is activated, the alarm will sound again at the
end of the snooze period of seven minutes. You can also press and
hold while the alarm is sounding, to stop the alarm and turn off the
snooze function.

Note:
tA key press will still disable the alarm even if the handset keypad is

locked when the alarm rings.

tThe alarm volume level is the same as the settings of the handset

ringer volume. If the handset ringer is set to “VOLUME OFF“, the
alarm still sounds at “VOLUME 1“ level.

tDuring an external call or internal call, if an alarm is set and when

the alarm time is reached, the and “ALARM ON” will still ﬂash.
An alarm tone will be emitted from the earpiece to alert the user the
alarm time Once the user presses any key or presses and holds. to
disable the alarm, the display will revert to the call duration.

tDuring paging or ringing, the alarm will not sound when the alarm

time isreached. However, if the snooze function is enabled and there
is no paging or ringing, the alarm will sound again at the end of the
snooze period.

10.2.1

Turn on/off the alarm

tPress

and / to select “HS SETTINGS“.

tPress

and / to select “ALARM“.

tPress

and / to select “ON/OFF“.

tPress

to conﬁrm.

Note:

If ON is selected, you will be asked to set the alarm time.

10.2.2

Set the alarm time (if alarm time is set to be ON)

tFollow Steps 1 to 4 in Section 10.2.1.
tEnter the alarm time in 24 hour format.
tPress

to display “SNOOZE“.

tPress

and / to select snooze “ON“ or “OFF“.

tPress

to conﬁrm.