AEG Voxtel D220bt User Manual
Page 30

30
Note:
You cannot de-register the handset that you are currently using.
tPress
OK
and / to select “BS SETTINGS“.
tPress
OK
and / to select “DELETE HS“.
tPress
OK
and the display shows “PIN?----“.
tEnter the 4-digit system PIN.
tPress
OK
and the first handset number is displayed.
tPress / to step through the list of registered handsets, and select
the number of the handset you want to de-register.
tPress
OK
to confirm, and the chosen handset will be de-
registered.
10.6.4
Change the Flash (Recall) Time
You may need to change the recall (flash) time if your phone is
connected to a PBX. The recall time options are “SHORT“ (the default
value of 100ms), “MEDIUM“ (300ms) or “LONG“ (600ms).
tPress
OK
and / to select “BS SETTINGS“.
tPress
OK
and / to select “FLASH TIME“.
tPress
OK
and / to select your desired flash time (“SHORT“,
“MEDIUM“, “LONG“, with the current setting indicated by an
asterisk.
tPress
OK
to confirm.
10.6.5
Change the System PIN Code
A 4-digit system PIN code is used for changing the system settings of
the base station. It is used to protect your phone against unauthorised
use. The default system PIN code is 0000.
tPress
OK
and / to select “BS SETTINGS“.
tPress
OK
and / to select “CHANGE PIN“.
tPress
OK
and the display shows “PIN?------“.
tEnter the old system PIN.
tPress
OK
to display “NEW PIN?------“, and enter your new 4-digit
system PIN.
tPress
OK
to display “CONFIRM?------“, and enter your new
4-digit system PIN again.
Note:
If the new PIN entered in Step 6 is not the same as the new system PIN
entered in Step 5 you must enter the new system PIN at step 5 again.