Apple COLOR STYLEWRITER 2400 - Manual (Page 55)

Safety precautions
To prevent damage to the Color StyleWriter 2400 printer and harm to yourself
and other users, follow these safety tips.
m Don’t touch anything inside the printer except as described in the
instructions in this manual. Otherwise, you may damage delicate
mechanical parts.
m Don’t shake ink tanks or hold them with the ink opening pointing down.
Ink can leak out and cause stains.
m Don’t touch the ink opening on an ink tank.
m Don’t oil the inside of the printer.
m Don’t attempt to disassemble the printer.
m Before you unplug the printer, make sure it is turned off. (The green power
light should be off.) Turning the power off ensures that the carrier has
returned securely to its home position and the cartridge has been capped.
The Chooser doesn’t show the Color SW 2400 icon
You use the Chooser desk accessory to identify the printer you intend to use.
If the Color SW 2400 icon is missing from the Chooser dialog box, you
probably need to install the appropriate printer software. For instructions, see
“Installing Your Printer Software” in Chapter 1.
Installation is unsuccessful
If a message tells you that installation was not successful, try turning off your
extensions before you install the software. Press and hold down the Shift key
as you choose Restart from the Special menu. The Macintosh restarts with all
extensions turned off, and you can repeat the installation procedure. For
instructions, see “Installing Your Printer Software” in Chapter 1.
If you still cannot install the printer software, the problem may be caused by
fonts in your Fonts folder. To solve this problem, you can remove items from
your Fonts folder or do a custom installation, as described in the next two
sections.
50 Chapter 5