Apple COLOR STYLEWRITER 2400 - Manual (Page 25)

Telling your computer to use the Color StyleWriter 2400
Before using your printer, you must select it in the Chooser.
1 Select Chooser from the Apple (
K
) menu.
2 In the Chooser dialog box, click items to select them.
On most Macintosh computers, the Chooser looks like this:
3 Close the Chooser by clicking its close box (in the top-left corner).
Special information for PowerBook owners
Some PowerBook computers have a single serial port identified by a
combination printer/modem icon (
[/W). If an internal modem is installed on
one of these PowerBook computers, the serial port may be in use even though
it looks available. When you plug in the Color StyleWriter 2400, the
PowerBook may not be able to communicate with the printer.
To make the port available for printing, make sure the serial port setting is
Normal or External. To check the setting, open the PowerBook, PowerBook
Setup, or Express Modem control panel. (The control panel and the setting
you use depend on which PowerBook you have and which internal modem
you have.) If you have a PowerBook Express Modem, it is best to leave the
serial port setting as Normal or External unless the modem programs you use
require another setting for compatibility reasons.
18 Chapter 1
Then click one of these
items to indicate which port
you connected the printer to:
the printer port (
[
) or the
modem port (
W
).
If no port is available
and your computer is a
PowerBook, see the
information below.
First, click this icon.
(If you don’t see the
icon, use the scroll
bar and arrows
to find it.)
If your computer is
connected to a
network, the Chooser
may look different,
but you can follow
these steps.