AEG Voxtel M800 - Manual (Page 8)

8
4.2 Charging the battery
Warning:
Use only the supplied/approved batterie and
charger. Using others may be dangerous and will
invalidate warranty. A battery must be fitted.
Do not charge with the back cover removed.
• Connect the charger lead firmly into the micro-
USB socket on the top of the handset or place
the handset directly in the charging cradle.
• Plug the mains power adapter into an AC mains
socket. If the handset is turned on, “Charger
connected” displays for a few seconds and
the battery symbol bars scroll to indicate that
charging has started.
If the handset is turned off, the display shows a
large battery symbol with segments cycling for
about 1 minute to indicate it is charging.
• If the ‘Charger connected’ does not display,
disconnect and retry.
• The battery is fully charged when the bars
within the battery symbol are continuously on.
Disconnect the charger from the phone and
the AC outlet. “Charger removed” displays
for a few seconds to indicate the charging has
stopped.
Note:
The battery can also be charged if the handset
is connected to a USB port of a computer. “USB
charger connected” appears briefly and then gives
the option of “Mass storage” or “COM port”.
Select “Mass storage” if you want to transfer data