Xerox WorkCentre C226-17905 - Manual (Page 2)

Step 3: Protocol Enablement
Follow this procedure if you want to make any changes to the port settings. If no
changes are required then please move on to Step 4.
1. Press Machine Administration button on the Local User Interface Operation Panel.
2. Press System Administrator Tools button. Enter Password (Default: 00000).
3. Press Printer Selections.
4. Press Network Settings.
5. Press Enable protocols by toggling them on/off as checkboxes
6. Press OK.
7. Press Yes to restart after making changes.
8. Reboot the printer using on/off switch on the left side of machine.
9. If no further changes are required, continue to Step 5 in this guide.
Step 4: Print Lists
1. Press the Machine Administration button on the Local User Interface Operation Panel.
2. Press Print Lists and Test Pages.
3. Press Print Test Pages.
4. Press one of the following:
a. Printer Settings List
b. PCL Font List
c. PCL Symbol Set List
d. Network Interface Card Page.
5. Press the CA button on the Local UI Operation Panel to return to the
Main Screen.
Machine Administration
Resolution: 600 DPI
Language: English British
Hardware Specs
Base Memory: 128 MB
Optional Memory: 512 MB
Total Memory: 640 MB
HDD: 40 GB
FW. Version
PCU Ver: x.xx
ICU Ver: x.xx
Boot Ver: x.xx
PRT: xxx
Installed Device
2-Sided System: 2-Sided Module
Paper Feeding Options: 2 Tray Unit
High Cap. Feeder: Installed
Paper Exit Options: Saddle Stitch Fin.
Print Server Card: Installed Default Settings
Copies: 1 Set
Orientation: Portrait
Default Paper: Size: A4
Default Paper Type: Plain
Default Output Tray: Centre Tray
PCL Symbol Set: Roman-1
Font Number:1 Font: Courier
PCL5c Emulation
Font Source: Resident
Pitch Size: 10.00
Point Size: 12.00
Network Information
Enable DHCP: Yes/No
IP Address: xxx.xxx.xxx
IP Sub. Mask: xxx.xxx.xxx
IP Gateway: xxx.xxx.xxx
Enable TCPIP: Yes
Enable Netware: Yes
Enable NetBEUI: Yes
NIC Firmware Version: x.x.x
NW Print Server Name: XCxxxxxxx
NetBEUI Workgroup: Workgroup
NetBEUI Printer Name: XCxxxxxxx
Color Calibration
Low Method: AutoCalibration
Date & Time: 4/03/2005 6:45
Tray Settings
Tray 1: A4 /Plain
Tray 2: A3 /Plain
Tray 3 A4 /Plain
Tray 5 A4 /Plain
Tray 6 /A4 Plain
Print/Copy/Fax: Enabled
Auto Tray Switching: On
Total Count
Color: 930
B/W: 1294
Xerox WorkCentre C226
Custom Setting List
Sample Printer Settings List