Xerox WorkCentre PE120-120i-4392 - Manual (Page 16)

Using Your Machine In Linux A.16
9
The scanned image appears in the new Image Editor
window.
If you want to edit the scanned image, use the toolbar. For
further details about editing an image, see page A.17.
10 When you are finished, click Save on the toolbar.
11 Select the file directory where you want to save the image
and enter the file name.
12
Click Save.
Adding Job Type Settings
You can save your scan option settings to retrieve for a later
scanning.
To save a new Job Type setting:
1
Change the options from the Scanner Properties window.
2 Click Save As.
3
Enter the name for your setting.
4 Click OK.
Your setting is added to the Saved Settings drop-down list.