Xerox 4112-4127 Enterprise Printing System-4616 - Manual (Page 7)

Xerox 4112/4127 EPS Introduction
Quick Start Guide 1-3
No. Component Function
1 Services Press this button to access the various service screens.
Services may not be available on EPS systems.
2 Control panel Select features with buttons and the keypad.
3 Touch Screen Select the available programming by touching the screen.
4 Job Status Displays the Job Status feature screens.
5 Machine Status Displays the current status of the machine on the touch screen.
6 Energy Saver This button lights when the machine is in the Power Saver
mode. Press this button to exit Power Saver mode.
7 Clear All Clears all programming and returns the machine to its default
settings.
8 Interrupt Temporarily stops the current copy job to allow a priority job to be run.
9 Stop Temporarily stops the current job. Follow the message to cancel or
resume your job.
10 Start Starts the job.
11 Numeric keypad Enter the number of copies, a password, and other numerical values.
12 Clear Deletes numeric values or the last digit entered.
13 Language Changes text to an alternative language.
14 Log In/Out Provides password protected access to the System Administration
menu, which is used to adjust the defaults on the machine.
15 Brightness dial Adjusts the brightness of the Touch screen.