Xerox WorkCentre M15i-2704 - Manual (Page 5)

Page 5
Making Connections
Use the following instructions to make the necessary connections required to
install the WorkCentre M15/M15i.
Automatic Document Feeder (ADF)
Telephone Line (M15i only)
1
Ø
Connect the Automatic
Document Feeder Cable to the
port shown and fasten the side
screws.
Note: The ADF is an option on the M15
2
Ø
Connect the Telephone Line
Cord from the wall jack to the
LINE jack.
Ø If required, connect an
answering machine and/or
telephone to the EXT jack.