Xerox WorkCentre M15i-2704 - Manual (Page 17)

Page 17
Installing Software
Installing the drivers and other software will enable PC printing. Ensure the
WorkCentre M15/M15i is plugged in and connected to the computer’s
parallel or USB port before installing software from the CD.
Note: Windows 95 and Windows NT 4.0 do not support USB connection.
1
Ø
Switch on the PC and start
Windows.
Note: If a window appears concerning
New Hardware, select Cancel.
2
Ø
Insert the Driver CD into the CD-
ROM drive of the PC. If the
Xerox screen appears
automatically, go to step 3.
Ø
From the Start menu, select
[Run].
Ø
Type D:\XINSTALL.EXE ( “D” is
the letter of the CD-ROM drive).
Ø
Select [OK].
Run
D:\XINSTALL.EXE
OK
Open:
Browse... Cancel