Asante Technologies 1000 - Manual (Page 40)

Management
Page 4-16
Specifying Port Access
To restrict access to a port by specifying the physical address that is
authorized to connect to the port:
1
Select the number of the port you want to control
access to by clicking once on a row containing that
port number.
For example, to specify access to port number 3, click on a
row entry that contains a
Port ID of 3.
2
Click Modify.
The Modify Dialog box appears.
3
Type the MAC address that is authorized to connect to
this port in the
Address field.
4
Determine the status of the address by opening the
Address Status drop-down menu and selecting one
of the following options:
❏
nonPermanent — sets the address to be a
non-permanent entry in the table; the IP
address is deleted after the specified aging time
or when the device is reset or powered off.
❏ permanent — sets the address to be a perma-
nent entry in the table; the IP address is not
deleted regardless of time or power off/reset.
5
Determine the priority of the address by opening the
Address Priority drop-down menu and selecting one
of the following options:
❏ normalPriority — sets the address to filter
normally through the device.
❏ highPriority — sets the address to filter at a
high priority through the device.
6
Click Apply.
Access for the port is configured. To view updated infor-
mation, click
Refresh.
book Page 16 Thursday, September 4, 1997 3:47 PM