Xerox DocuColor 242-252-260 con Creo Spire CX260-15300 - Manual (Page 3)

Page 3 of 4
Spire Print Driver Extension
About the Print Driver Software
The Spire Print Driver software enables you to set job parameters for jobs that you send to the Xerox
DocuColor printer/copier from any application on your PC client workstation.
The Print Driver software also enables you to see the Xerox DocuColor printer/copier configuration,
monitor’s the printer status, and save a set of print parameters for reuse.
Installing the Print Driver Software:
1. Open the file that you want to print—for example, a PDF file.
2. From the File menu, select Print.
3. In the Print dialog box, click Properties.
If this is the first time that you are using the Print Driver software, a message tells you that the software is
loading. Then a dialog box appears with the print parameters.
Note: The loading process might take a few minutes. Afterwards, accessing the Print Driver software
takes less time.
Uninstalling the Print Driver Software
If a new version of the Printer Driver Software is available you need to uninstall the current Printer Driver
version from the client station.
1. Before removing the driver exit all running programs at the client station
2. Select Start -> Run -> \\%Color_Server% go to \Utilities\PC utilities\Driver Extension
3. Select the DEXUninstaller.exe
4. Choose the Printer Driver that you want to remove and O.K.
Creo Printer Driver Extension is now removed from the client station you can now install new driver extension
as instruct in the first section of this chapter.
Limitation Note: As for now Spire Printer Driver Software is not supporting Window 2003 print server.