Konica Minolta bizhub C650 User Manual
Page 71
C650
2-47
User mode
2
Color
Select the color mode. The file formats that can be saved may be limited ac-
cording to the Color setting. For details, refer to the User’s Guide [Network
Scanner Operations].
Separate Scan
Select either "ON" or "OFF".
Density
Select the density.
Background Removal
Adjust the density of the background.
Scan Size
Select the document size ("Auto", "Standard Size" or "Custom Size").
If "Standard Size" is selected, select the size and the feed direction.
If "Custom Size" is selected, specify the height and width.
Application Setting
Click the [Display] button, and then specify settings for the functions that are
displayed.
E-mail Notification
Specify whether to send notification of scan data URL.
Specify the destination address in the "Address" box. To select a destination
from a list, click the [Search from List] button.
Timer TX
Select whether or not to enable timer transmission.
If "ON" is selected, specify the time.
Password TX
Select whether or not to enable password transmission.
If "ON" is selected, specify the password.
F-Code
Select whether or not to enable F-codes.
If "Enabled" is selected, type in the SUB address and password.
Original Direction
Select the document orientation.
2-Sided Binding Direction
Select the position of the document binding margin.
Special Original
Select "Normal", "Mixed Original", "Z-Fold Original" or "Long Original" as the
setting for the loaded document.
Book Scan
Specify whether to perform book scan.
To specify this item, select settings for the scanning method and center eras-
ing. If any setting other than "Book Spread" is selected for the scanning meth-
od, select the binding direction.
Erase
Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides of the docu-
ment ("Top", "Bottom", "Left" and "Right").
Compose (Date/Time)
Specify whether to print the date/time.
To specify this item, specify settings for the following.
•
Date Type
•
Time Type
•
Print Position
•
Fine-Tune (for making fine adjustments to the print position)
•
Color
•
Pages
•
Size
Compose (Page)
Specify whether to pint page numbers.
To specify this item, specify settings for the following.
•
Page Number (Range: -99999 to 99999)
•
Chapter (Range: -100 to 100)
•
Page Number Type
•
Print Position
•
Fine-Tune (for making fine adjustments to the print position)
•
Color
•
Size
Compose (Header/Footer)
Selects whether to print a header/footer.
To specify this item, specify the registration number of the header/footer. To
check the registered header/foot, click the [Confirm Registed Contents] but-
ton.
Compose (Stamp)
Specify whether to print the stamp.
To specify this item, specify settings for the following.
•
Preset Stamp or Registered Stamp
•
Print Position
•
Fine-Tune (for making fine adjustments to the print position)
•
Color
•
Pages
•
Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Stamp Combine Method
Select "Image" or "Text".
Item
Description