E-mail setting - e-mail rx (pop), E-mail setting - e-mail rx (pop) -58 – Konica Minolta bizhub C650 User Manual
Page 132
C650
3-58
Administrator mode
3
Peer
E-mail Setting - E-mail RX (POP)
Specify settings when using POP before SMTP for authenticating the e-mail sender.
Item
Description
Perfect Forward Secrecy
To increase the IKE strength, select "ON".
Peer
Specify the IP address of the peer.
Pre-Shared Key Text
Specify the Pre-Shared Key text shared with the peer.
Encapsulation Mode
Specify the operation mode of IPsec.
Item
Description
E-mail RX Setting
Select whether or not e-mail is received.
POP Server Address
Type in the address of the reception POP server. (Format: ***.***.***.*** or FQ DN:
Range for ***: 0 to 255) To type in a host name, select the "Please check to enter
host name." check box. If the machine is set to use IPv6, an IPv6 address can
also be specified.
Before entering a host name, check that the DNS setting is correctly specified.
For details, refer to "TCP/IP Setting - TCP/IP Setting" on page 3-53.
Login Name
Type in the logon name for the POP server (up to 63 characters).
Password
Type in the password for logging on to the POP server (up to 15 characters).
APOP Authentication
Select whether or not APOP authentication is used.
MDN Response
Select whether MDN response is turned on or off.
Connection Timeout
Specify the amount of time until communication with the server times out.
Port Number
Type in the port number for the server. (Range: 1 to 65535)