Konica Minolta bizhub C650 - Manual (Page 70)

C650 2-46
User mode 2
If "No Destination" was selected.
Special Original Select "Normal", "Mixed Original", "Z-Folded Original" or "Long Original" as
the setting for the loaded document.
Book Scan Specify whether to perform book scan.
To specify this item, select settings for the scanning method and center eras-
ing. If any setting other than "Book Spread" is selected for the scanning meth-
od, select the binding direction.
Erase Specify whether to perform frame erase.
To specify this item, specify the width that is erased on all sides of the docu-
ment ("Top", "Bottom", "Left" and "Right").
Compose (Date/Time) Specify whether to print the date/time.
To specify this item, specify settings for the following.
•
Date Type
• Time Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
Compose (Page) Specify whether to pint page numbers.
To specify this item, specify settings for the following.
•
Page Number (Range: -99999 to 99999)
• Chapter (Range: -100 to 100)
• Page Number Type
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Size
Compose (Header/Footer) Selects whether to print a header/footer.
To specify this item, specify the registration number of the header/footer. To
check the registered header/foot, click the [Confirm Registed Contents] but-
ton.
Compose (Stamp) Specify whether to print the stamp.
To specify this item, specify settings for the following.
•
Preset Stamp or Registered Stamp
• Print Position
• Fine-Tune (for making fine adjustments to the print position)
• Color
• Pages
• Size
To check a registered stamp, click the [Confirm Registed Contents] button. A
registered stamp must first be registered from the control panel.
Stamp Combine Method Select "Image" or "Text".
Limiting Access to Destinations To specify the access level of the destination, click the [Display] button. If an
access permission group is specified for the user who is logged on, the set-
tings for "Search from Reference Allowed Group" appear.
If "Search from Reference Allowed Group" is selected, click the [Search from
List] button, and then select an access permission group from the list. If "Set
direct Reference Allowed Level" is selected, select a level.
Item Description
Item Description
No. Displays the registration number.
Name Type in the name of the program (up to 24 characters).
Resolution Select the resolution.
File Type Select the file format.
File Name Type in the file name (up to 30 characters).
Page Setting Select how the data is to be saved.
Subject Specify the e-mail subject. If "Not Specified" is selected, the default subject is
used. To check the content of the subject, click the [Subject List] button.
Text Specify the e-mail text. If "Not Specified" is selected, the default text is used.
To check the content of the text, click the [Text List] button.
Simplex/Duplex Select "1-Sided", "2-Sided" or "Cover Sheet + 2-Sided".
Original Type Select the document quality, such as text or photo.