Konica Minolta magicolor 4690MF User Manual
Page 53
Sending a Fax at a Specified Time (Timer Transmission)
47
"
To erase the selected destinations, press the Stop/Reset key.
3
When
EDIT=SELECT
appears, press the Select key again.
4
Press the + or , key to select
FINISH
, and then press the Select key.
5
Press the Start key.
The document is scanned, and then the fax is sent.
Sending a Fax at a Specified Time (Timer
Transmission)
A document can be scanned and stored in memory to be sent at a specified
time. This feature is convenient for sending faxes at discounted calling times.
"
When sending multiple documents together to a single destination at a
specified time, batch transmission is useful since only a single con-
nection is required.
"
If the machine is not programmed with the current time, the fax cannot
be sent at the specified time. For details on specifying the time, refer
to “ADMIN. MANAGEMENT” on page 21.
"
Timer transmission can be combined with broadcast transmission.
1
Position the document to be faxed.
2
If desired, adjust the image quality.
"
The document image quality can be adjusted. For details, refer to
“Adjusting the Image Quality” on page 40.
3
Press the + or , key to select TIMER TX, and then press the Select key.
The TIMER TX SETTING screen appears.
4
Using the keypad, enter the desired transmission time, and then press the
Select key.
"
The time is set in the 24-hour format.
"
If you want to correct the time, press the Back key, and then enter the
correct time.
5
Specify the fax number of the recipient.
"