1 introduction, Compliance with the iso15408 standard, Operating precautions – Konica Minolta bizhub C352 User Manual
Page 9: Security, Introduction -2, 1security
1
Security
1-2
C352
Security
Chapter 1
1
Security
1.1
Introduction
Thank you for purchasing our product.
This User’s Guide contains the operating procedures and precautions to be
used when using the security functions offered by the bizhub C352 machine.
To ensure the best possible performance and effective use of the machine,
read this manual thoroughly before using the security functions. The Admin-
istrator of the machine should keep this manual for ready reference. The
manual should be of great help in finding solutions to operating problems
and questions.
This User’s Guide (Ver. 1.03) describes bizhub C352/bizhub C300/ineo+
351/ineo+ 300 Multi Function Peripheral Control Software (MFP Controller:
9J06-0100-GM0-08-000).
Compliance with the ISO15408 Standard
When the Enhanced security mode on this machine is set to [ON], more en-
hanced security functions are available.
The security functions offered by the bizhub C352 machine comply with ISO/
IEC15408 (level: EAL3).
Operating Precautions
The machine gives an alarm message or an alarm sound (peep) when a
wrong operation is performed or a wrong entry is made during operation of
the machine. (No “peep” alarm sound is issued if Key Accept Sound/Key
Refuse Sound in Sound Setting of Accessibility Setting is set to [OFF].) If the
alarm message or alarm sound is given, perform the correct operation or
make the correct entry according to the instructions given by the message
or other means.
The Administrator of the machine should make sure that each individual gen-
eral user exits from the current mode to return to the basic screen whenever
the access to that mode is completed or if the user leaves the machine with
the mode screen left displayed.
The Administrator of the machine should exit from the current mode to return
to the basic screen whenever the access to that mode is completed or if he
or she leaves the machine with the mode screen left displayed.
The PageScope Web Connection functions can be used only if the setting is
made to accept “Cookie.”
c352_security_E.book 2 ページ 2007年4月11日 水曜日 午前10時52分