Konica Minolta Magicolor 5450 - Manual (Page 26)

Selecting Driver Options/Defaults (for Windows) 12
Windows Me/98SE (KONICA MINOLTA mc5450 PPD)
1
Choose the driver’s properties as follows:
– From the Start menu, choose Settings and then Printers to display
the Printers directory. Right-click the KONICA MINOLTA mc5450
PPD printer icon and choose Properties.
2
Select the Device Options tab.
3
Check that the installed options are correctly listed. If not, proceed with
the next step. Otherwise, continue with step 6.
4
From the Installable options list, select an option, one at a time, and
then select Enable or Disable from the Change setting for: menu.
!"
If VMOption is selected, select 256 MB, 512 MB, 768 MB or
1024 MB, according to the installed memory. The factory default
setting is 256 MB.
5
Click Apply.
6
Select the default settings for your printer, such as the default media for-
mat you use, on the appropriate tabs.
7
Click Apply.
8
Click OK.