Konica Minolta Magicolor 5450 - Manual (Page 196)

Lower Feeder Unit 182
2
Prepare the lower feeder unit.
!"
Be sure to place the lower feeder unit on a level surface.
3
Open the right side cover of the
lower feeder unit.
!"
The right side cover of the lower feeder must be opened before the
feeder can be installed onto the printer.
4
With another person’s help,
place the printer on top of the
lower feeder unit, making sure
that the positioning pins on the
lower feeder unit correctly fit into
the holes on the bottom of the
printer.
!"
If two lower feeder units are to be installed, stack the two lower
feeder units and secure them together before installing them to the
printer.
WARNING!
This printer weighs approximately 37 kg (81.6 lb) when it is fully loaded
with consumables. The printer must be lifted by two people.
37 kg 37 kg
81.6 lbs 81.6 lbs