Konica Minolta bizhub PRESS 1250P - Manual (Page 11)

R e v 1 . 0 . . .. . . .. . . . . . .. . . .. . . .. . . .. . .. . . .. . . .. . . .. . . .. . . .. . . .111111111111111 ‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘‘ ‘‘ J u ly 2 0 1 2
6. Creating Bind Job
6.1 SETTING FRONT & BACK COVER
The GP-502 requires that a front and back cover be used. Refer
to the media section of this manual for a list of approved cover
weights.
Refer to the printers display, then perform the
following:
1. Check the GP-502 screen and ensure that is
states ready. See Fig. 1
2. Navigate to the (Copy) menu. Select
(Application). See Fig. 2
3. Select (Insert Sheet). See Fig. 3
4. Select an approved cover type for
both the front and back cover. See Fig. 4
6.2 ENABLING BIND FUNCTION
Refer to the media section of this manual for a list of
approved paper weights for the book body.
Refer to the printers display, then perform the following:
1. Navigate to the (Copy) menu. Then select
(Output Setting). See Fig. 4
2. Select the (Ring Bind) function. See Fig. 5
11
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 4
Fig. 5