Konica Minolta eCopy - Manual (Page 26)

22 | Using the connector
Post-scanning options
TABLE 3. Post-scanning options
Option Description
Log Out Displays the Logon screen. Appears only when Session Logon is enabled.
New Job Displays the main Client screen. Appears only when Session Logon is enabled.
Done Displays the main Client screen. Appears only when Session Logon is not enabled.
New
Document Displays the scan preview screen and enables you to scan a new document using the current
settings. Place the new document in the feeder or on the glass and then press Scan More (if
you are using the Client’s interface) or Insert (if you are using the TWAIN driver’s own
interface). If you are using a device with an embedded Client, you can press the device’s Start
button to scan the new document.
New
Destination Enables you to send the scanned document to another connector. Select the target connector
in the list and then press New Destination. The Client opens the target connector and displays
the scanned document on the scan preview screen. Press Next and then follow the prompts
provided by the target connector.