Konica Minolta bizhub PRO 1200 - Manual (Page 63)

Using Perfect Binder PB-503 4
bizhub PRO 1200/1200P/1051 Additional Information 59
4.5 Taking Out Perfect-Bound Books from the Perfect
Binder Tray
Procedure
1
Check the output sheets through the perfect binder tray window.
– If piled books show only on the right side of the tray, proceed to
step 2.
If two columns of books show on the tray, proceed to step 3.
2
Press the feeding button to
move the books to the car-
riage on the right side.
– Delivery to the perfect
binder tray is available
even if the carriage is not
installed inside the per-
fect binder tray. In this
case, tray capacity will
be a half of that with the
carriage installed. (1 set
30 mm thick Ч 11 Ч 1 col-
umn = approx. 3,300 sheets)
– The feeding button will not function while the perfect-bound books
are delivered to the perfect binder tray.
– The feeding button will not function without the carriage installed.
3
Open the perfect binder tray
front door.
– The perfect binder tray
front door will not open
while delivering the per-
fect-bound books to the
perfect binder tray, or
moving them by pressing
the feeding button.