Konica Minolta bizhub PRO 1200 - Manual (Page 54)

4 Using Perfect Binder PB-503
50 bizhub PRO 1200/1200P/1051 Additional Information
? Do you want to stop using the perfect binder?
% The perfect binder will not stop warming up even if [Function Off] is
touched on the Perfect Binding Screen or [Reset] is pressed on the
control panel. Return to the Machine Status Screen, then touch [PB
heater] to turn off the heater so as to prevent degradation of paste
pellets.
5
Select the tray loaded with covers, then specify the paper setting.
– Touch [Change Set] on the right side of the Cover Tray area to dis-
play the Cover Tray Screen.
– Touch the tray loaded with covers in step 2 to highlight it, then
touch [Change Paper Setting].
If any tray other than trays 1 to 8 is selected, the Cover Print setting
in step 7 will be limited to Cover Print Off.