Konica Minolta bizhub PRO 1200 - Manual (Page 49)

Using Perfect Binder PB-503 4
bizhub PRO 1200/1200P/1051 Additional Information 45
- Maximum number of Z-folded insertions and body sheets:
- Covers fed from trays 1 to 8 can be simplex- or duplex-printed, while
those loaded in the cover feeding tray of perfect binder or the upper/low-
er tray of post inserter on folding unit cannot be printed.
- When specified, Cover Trimming function trims the cover by the amount
automatically estimated from the following formula, in the range from
3 mm to 40 mm in 0.1 mm increments.
(Cover width) – (Body width × 2) – (Spine width)
If the estimated amount exceeds 10 mm, perfect binder will automatically
trim the cover whether this function is activated or not.
- Fine Adjustment
Cover Lead Edge Adjustment: Adjusts the position of front cover and
body set in widthwise direction in the range from –20 mm to +5.0 mm in
0.1 mm increments.
Cover Trimming Adjustment: Adjusts the trimming width in the range
from –5.0 mm to +5.0 mm in 0.1 mm increments.
Cover Image Shift Adjustment: Adjusts the position of image to be print-
ed on the front cover when using Cover Print mode.
*1: Specify the custom cover size from the Perfect Binding Screen. See
page 50 for details.
*2: For 8.5" × 11"
v body set to be bound with a cover sheet fed from
trays 1 to 8, the maximum thickness will be less than 30 mm.
Cover Trimming Off: 460 – (216 × 2) = 28 mm
Cover Trimming On: 460 – (216 × 2) – (Trimming width 3 mm) = 25 mm
If thickness of 8.5" × 11" body set is more than that mentioned above, use
the cover feeding tray of perfect binder or the post inserter tray of folding
unit to attach a cover.
*3: You can specify the paper weight available for body sets and covers
in Perfect Binding mode. For details, see POD Administrator’s reference.
*4: The minimum/maximum number of sheets to be bound in Perfect
Binding can be changed according to the paper weight of body set. For
details, see POD Administrator’s reference.
Also, the machine can be set to detect the thickness of body set and to
stop the binding operation temporarily if the width of the cover to be used
is unsuitable for the body set. For details, see POD Administrator’s refer-
ence.
Z-folded insertions Body sheets Total at maximum
1 sheet
2 sheets
3 sheets
4 sheets
200 sheets
150 sheets
100 sheets
50 sheets
201 sheets
152 sheets
103 sheets
54 sheets