Konica Minolta bizhub C250 - Manual (Page 89)

2 Scanning Documents
2-56 C250
Scan
nin
g
Do
cu
men
ts
Chapter 2
Original Setting
Specify the type of document that is loaded, for example, if it contains mixed
sizes or is a thick document.
2
Note
These functions can be combined.
To specify the Original Settings
1
Touch [Scan Settings] in the Scan mode screen.
2
Touch [Original Setting].
Item Description
Mixed Original Select this setting when documents of different sizes are
loaded into the ADF (optional). The scan speed is decreased
since the size of each page is detected before it is scanned.
Thick Original Select this setting when Scanning a thick document.
Original Direction Specifies the orientation of the document. The data is
processed so that the top and bottom ends are correctly
positioned when the document is scanned.
Bind Specifies the binding position for punched holes and staples.
This function adjusts the binding position so that it is not re-
versed when a double-sided document is scanned.
Left: A document with a bind on the left side.
Top: A document with a bind on the top side.
Auto: If the length is 11-3/4 in. or less, the binding position is
along the long side of the paper. If the length is more than
11-3/4 in., the binding position is along the short side of the
paper.