Konica Minolta bizhub C250 - Manual (Page 21)

1 Before Using the Scan Functions
1-2 C250
Be
fo
re
Using
t
h
e
Scan
F
unct
ion
s
Chapter 1
1 Before Using the Scan Functions
1.1 Environment Required for Using the Scan Functions
The following conditions are required to use the network and scanning func-
tions of this machine.
- The machine is connected to the network. (required)
The functions can be used over a TCP/IP network. For details on the con-
nection, refer to “Connecting to the Network” on page 1-11. Also, net-
work parameters such as the IP address of this machine must be
specified in order to use the machine on the network. For details, refer to
“Settings for Using Network/Scanning Functions” on page 1-8.
- The driver software is installed on the computer.
In order to use this machine as a scanner, the dedicated
KONICA MINOLTA TWAIN must be installed. For details, refer to the
TWAIN driver manual that is on the User Software CD-ROM.