Konica Minolta bizhub C250 - Manual (Page 65)

2 Administrator Operations
2-46 C250
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
7
Click the “User Box Password is changed.” check box and enter the
User Box Password.
? What precautions should be used when entering the User Box
Password?
% If the User Box Type has been set to [Public], enter a User Box
Password that meets the requirements of the Password Rules in
the “New Password” box. For details of Password Rules, see
“Password Rules” on page 1-11.
% In the “Retype New Password” box, enter the same User Box Pass-
word as that entered in the “New Password” box.
8
Click the [Apply].
? What happens if the User Box Password entered does not meet the
requirements of Password Rules when Public is set for User Box
Type?
% If the User Box Password entered does not meet the requirements
of the Password Rules when [Public] is set for User Box Type, a
message appears that tells that the User Box Password entered
cannot be used. Click [OK] to go back to the screen of step 5. Per-
form steps 5 through 8 once again. For details of Password Rules,
see “Password Rules” on page 1-11.
? What happens if there is a mismatch in the User Box Passwords?
% If there is a mismatch in the User Box Password between that en-
tered in “New Password” and that entered in “Retype New Pass-
word,” a message appears that tells that there is a mismatch in the
User Box Password. Enter the correct User Box Password.
? What if no Owner Name, or a wrong one, has been entered?
% If no Owner Name is entered, a message appears that tells that no
Owner Names have been entered. Enter the correct Owner Name.
% If a user name not registered with the machine is entered in the
“Owner Name” box, a message appears that tells that the Owner
Name entered in the box is illegal. Click [OK] to go back to the
screen of step 5. Perform steps 5 through 8 once again.
9
Click the [OK].
c250_security_E.book 46 ページ ２００７年４月１１日 水曜日 午前１１時２分