Konica Minolta bizhub C250 User Manual
Page 115
3
User Operations
3-4
C250
Use
r Op
er
at
ions
Chapter 3
4
Touch [Password].
5
Enter the 8-to-64-digit User Password from the keyboard or keypad.
–
Press the [C] key to clear all characters.
–
Touch [Delete] to delete the last character entered.
–
Touch [Shift] to show the upper case/symbol screen.
–
Touch [Cancel] to go back to the screen shown in step 4.
6
Touch [OK].
7
Press the [Access] key.
?
What if a wrong User Name or User Password is entered?
%
If a wrong User Name is entered, a message appears that tells that
authentication has not been successful. The machine then prohibits
entry for User Authentication for 5 sec. and then causes the screen
of step 1 to reappear. Perform User Authentication once again.
%
If there is a mismatch of User Password relative to the registered
User Name, a message appears that tells that authentication has
not been successful. The machine then prohibits entry of User
Name and User Password for 5 sec. and then causes the screen of
step 4 to reappear. Enter the correct User Password.
c250_security_E.book 4 ページ 2007年4月11日 水曜日 午前11時2分