Konica Minolta bizhub C250 - Manual (Page 106)

Administrator Operations 2
C250 2-87
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
2.15 SMB Setting Function
When access to the Administrator Setting mode by the Administrator of the
machine is authenticated, the machine enables setting of the NetBIOS
Name.
2.15.1 Setting the NetBIOS Name
2
Note
Do not leave the machine with the Administrator Setting mode setting
screen left shown on the display. If it is absolutely necessary to leave the
machine, be sure first to log off from the Administrator Setting mode.
0 For the procedure to call the Network Setting menu to the display, see
steps 1 and 2 of “Changing the auth-password and priv-password” on
page 2-72.
1
Call the Network Setting to the screen from the control panel.
2
Touch [SMB Setting].
3
Touch [NetBIOS Name].
4
Make the necessary settings.
5
Touch [OK].
c250_security_E.book 87 ページ ２００７年４月１１日 水曜日 午前１１時２分