Konica Minolta bizhub C250 User Manual
Page 140
User Operations
3
C250
3-29
Use
r Op
er
at
ions
Chapter 3
4
Touch [OK].
–
If the User Box Type has been changed, go to step 5. If the User
Box Password has been changed, go to step 9.
?
What happens if there is a mismatch in the User Box Password?
%
If there is a mismatch between the currently registered User Box
Password and the User Box Password entered, a message appears
that tells that there is a mismatch in the User Box Password and the
screen of step 2 reappears. Perform steps 2 through 4 once again.
%
If the Enhanced Security mode is set to [ON], entry of a wrong User
Box Password is counted as unauthorized access. If a wrong User
Box Password is entered a predetermined number of times (once
to three times) set by the Administrator of the machine, the screen
of step 2 reappears and the machine is set into an access lock
state. To cancel the access lock state, the Administrator of the ma-
chine must perform the Release Setting. Contact the Administrator
of the machine.
5
Select the User Box Type.
?
What happens when the User Box Type is changed?
%
If User Box Type has been changed from [Public] to [Personal],
Owner Name shows the User Name of the user who has registered
the User Box. To change the Owner User of the User Box to another
user, perform steps 6 through 8.
%
Changing the User Box Type clears the User Box Password. Per-
form steps 9 through 15 to set the User Box Password.
c250_security_E.book 29 ページ 2007年4月11日 水曜日 午前11時2分