Konica Minolta bizhub C250 - Manual (Page 32)

Administrator Operations 2
C250 2-13
Ad
minist
ra
to
r Op
er
at
ions
Chapter 2
– The following screen appears if the previously required settings are
yet to be made by the Administrator of the machine. Make the nec-
essary settings according to the corresponding set procedure.
– The following screen appears if the previously required settings are
yet to be made by the Service Engineer. Consult the Service Rep-
resentative.
? What is the factory setting for the Enhanced Security mode?
% The Enhanced Security mode is factory-set to [OFF]. Be sure to turn
[ON] the Enhanced Security mode so as to enable the security func-
tion of the machine.
5
Touch [OK].
c250_security_E.book 13 ページ ２００７年４月１１日 水曜日 午前１１時２分