Konica Minolta OpenText RightFax - Manual (Page 20)

OpenText Konica Minolta bEST iOption MFP Conn. for RightFax 10.5 Administrator’s Guide 20
Monitoring Remote EDC Processes
You can use EDC Monitor to view the monitoring statistics of a
remote EDC processor. To view remote processes in EDC
Monitor:
1. On the File menu, select Close to close the current
connection.
2. On the File menu, select Remote Connection .
3. In the Connect to Which Computer? box, enter the name of
a remote computer on which the EDC services are running. The
Activity view will display the statistics for the remote server.
4. To switch back to the local computer, select Local
Connection on the File menu.
Note Even though you can monitor remote EDC services, you can only
configure services on the local computer. To configure remote services,
log on to the computer that is running the services, run EDC Monitor
locally, and then use the Configuration Wizard or Advanced
Configuration.
Advanced Configuration Overview
The External Document Connector and its individual modules
usually only require the configuration options available in the EDC
Configuration Wizard. A number of advanced configuration options
are also available, many of which were designed for use in
troubleshooting in conjunction with OpenText Customer Support
and do not apply to the normal operation of EDC or its connectors.
Advanced configuration is typically only necessary for:
Setting the logging level for an individual process for
troubleshooting purposes
Adjusting the delay between processes - anywhere from 5
minutes to 24 hours
Pausing processing to troubleshoot a job file with the help of
an OpenText Customer Support representative
Debugging a process with the help of a OpenText Customer
Support representative
Warning: Always use caution when performing advanced configuration
in EDC Monitor. If you are not certain about the changes you are making,
contact OpenText Customer Support for assistance.
Adjusting the Advanced Configuration Settings
1. In EDC Monitor, click Tools , and then click Advanced
EDC Configuration .
2. In the Module list, click the module you want to edit and then
click Edit .
The Module Configuration window can be used for:
Setting Advanced Repository Options
Setting DataFlow Options and Filtering FlowPoints