Konica Minolta OpenText RightFax - Manual (Page 13)

Configuring the OpenText RightFax bEST Connector for Konica Minolta MFP 13
1. In a text editor, open the config file
RightFax\EDC\Modules\Konicabest\webapp\web.config
2. Edit the section to reflect the desired logging level.
Valid options are:
None turns off logging.
Error logs only error messages.
Operational (this is the default) logs warning and error
messages.
Information logs information, warning, and error messages.
Debug logs all events and messages.
Example:
value="Operational" />
3. Save the configuration file.
Changing the Port Number on the RightFax Server
By default Konica Native service runs on port number 50002 on
the RightFax server. Ensure that firewall on the RightFax server
is configured to allow the default port.
To change the port number:
1. Using a text editor, open
RightFax\EDC\Modules\KonicaNative\bin\RightFaxKonicabEST
Service.exe.config".
2. Change the following value to reflect the new port number:
3. Save and close the RightFaxKonicabESTService.exe.config file.
4. Using a text editor, open
RightFasx\EDC\Modules\KonicaNative\webapp\web.config".
5. Change the following value to reflect the new port number:
6. Save and close the .web.config file.
7. Restart the RightFaxKonicabESTService service.
8. Reinstall the application on the device. See “Installing the
OpenText RightFax bEST Connector for Konica Minolta MFP
on Konica Minolta MFP Devices”
on page 8.
Changing the OpenAPI port number
By default, the registration client uses port number 50001 to
communicate with the MFP to install and uninstall the connector.
You can change this port if needed. To do this, follow these steps:
1. With a text editor, open the configuration file at:
RightFax\EDC\Modules\Konicabest\WebApp\web.config
2. Add the following node and change the value to the desired
port number:
3. Save and close the configuration file.
Application Timeout
The application may time out while transmitting scanned image
files of lengthy documents. If your users are scanning unusually
long documents, extend the application timeout period on the
MFP. For more information, see the MFP documentation.