05 saddle stitcher adjustment (continued) – Konica Minolta SD-501 User Manual
Page 44
05 Saddle Stitcher Adjustment (continued)
3-8
6 If the desired result cannot be obtained, touch the ADJUSTMENT tab.
7 Touch Next or Back to select the paper size to be adjusted.
Touching Next continuously will change the paper size as follows.
All Size - 11x17 - A3 - B4 - 8.5x14 - A4R - 8.5x11R - B5R - 8x13 - 8.12x13.2 -
8.5x13 - 8.25x13 - 8K - 16KR - 12x18 - A3W - B4W - A4WR - B5WR - 12x18W -
11x17W - 8.5x11WR - Special
8 Use the touch panel keypad to enter the desired adjustment value, then touch
Set.
Available range: -20 (wide) to +20 (narrow), 1 step = 1 mm
9 Repeat the adjustment steps from 3 to 8 until the desired result is obtained.
10 If adjustment in any other paper size is required, repeat steps from 3 to 8.
11 Touch Return to restore the Saddle Stitcher Adjustment Mode Menu Screen.