Konica Minolta SD-501 - Manual (Page 20)

Paper Information (continued)
1-16
• Some types of fine paper (13~24 lb) may be limited to 30 sheets or 29
sheets + 1 (74 lb cover paper). Contact your service representative for
details.
• Fine (vertically laid) paper (16~24 lb) 300 mm or less in length will be
limited to 30 sheets or 29 sheets + 1 (74 lb cover paper).
• For using coated paper, heed the following limit.
When using Fold&Staple mode, Saddle stitcher tray capacity depends on the
number of folded and stapled sheets finished as a set. Heed the limits by
referring to the table below.
The Saddle stitcher tray should be fully withdrawn in order to accommodate
the maximum number.
Height of the folded and stapled booklet
The following table shows the standard height of folded and stapled booklet
according to the number of sheets and paper size.
Paper weight Maximum number of folded&stapled sheets
13 ~ 20 lb 25 sheets or 24 sheets + 1 (74 lb cover paper)
24 lb 15 sheets or 14 sheets + 1 (74 lb cover paper)
28 ~ 35 lb 10 sheets or 9 sheets + 1 (74 lb cover paper)
36 ~ 43 lb 5 sheets or 4 sheets + 1 (74 lb cover paper)
Number of sheets (1 set) Saddle stitcher tray capacity
2 ~ 10 50 sets
11 ~ 20 30 sets
21 ~ 40 20 sets
41 ~ 50 15 sets
Number
of sheets
(1 set)
Paper size
12x18, 11x17,
A3 (401mm
or more)
8.5x14, B4,
8K (301 ~
400mm)
8.5x11R,
A4R, 16KR
(261 ~
300mm)
B5R (260mm
or less)
2 ~ 5 35 mm 40 mm 45 mm Not specified
6 ~ 15 45 mm 50 mm Not specified Not specified
16 ~ 30 50 mm 55 mm Not specified Not specified
31 ~ 50 60 mm 65 mm Not specified Not specified