Konica Minolta SD-501 - Manual (Page 41)

05 Saddle Stitcher Adjustment (continued)
3-5
02 Stapling Paper Width Adjustment
Perform this adjustment if stapled sheets are not aligned neatly processed by the
SD-501 Saddle Stitcher.
Procedure
1 Touch Adjustment - 02 Finisher Adjustment - 05 Saddle Stitcher Adj.
2 Touch 02 Stapling Paper Width Adjustment to display the Staple Paper Width
Adjustment Screen.
3 Touch the COPY tab to display the Copy Screen.
4 Load the desired size of paper to be adjusted on a tray, select Fold&Staple and
then press [Start]. A sample pattern (No. 16) will be output.
5 Check misalignment (a), in which misalignment occurs if the paper width setting
is larger than the actual width, or paper curving (b), in which a sample set is
curved if the paper width setting is smaller than the actual width has occurred.
a
b